Request a Quote
Call us
Jeep Wrangler driving off-road with a 4BT Cummins engine
Call us

Making It Fit: Common Cummins 6BT & 4BT Swap Mods

By Mike McGlothlin

Diesel engine swaps have become all the rage in recent years. With them, you get improved fuel efficiency, long-term durability and, if you happen to choose a Cummins 4BT or 6BT, near-infinite aftermarket support. But any time you’re considering a 4BT swap or shoehorning a 6BT into place, it pays to think about the big picture. Things like frame rail width and firewall-to-grille measurements, oil pan to axle clearance, a suspension that can handle the weight of an all-iron diesel engine, and axles that can survive the immense torque these power plants can turn out.

Additional considerations revolve around which transmission you plan to use (where corresponding tunnel work may be required), what wiring will be needed, whether or not you should intercool, and whether or not it makes sense to source a complete donor vehicle. This time, we’re covering that, as well as the common obstacles folks often encounter in their 6BT or 4BT conversion journeys. From solving space and cooling issues to finding sound electronic and driveline solutions, it’s our goal to help make your B-series Cummins swap more than a dream, but a reality.

 

4BT vs. 6BT Engine Dimensions Comparison

EngineLengthWidthHeightWeight
Cummins 4BT30.6 inches24.6 inches37.7 inches745–782 lbs
Cummins 6BT35 inches24.9 inches37.7 inches1,100 lbs

 

Measure Twice, Cut Once (On Everything)

4bt Cummins Diesel Engine Ve Injection Pump

4bt Cummins Diesel Engine Ve Injection Pump

Measure, measure, measure. And when you think you’re sure, measure again. In order to fit a Cummins 4BT or (especially) a 6BT under the hood of your swap project, you need to know the length, width, and height of the fully dressed engine before any work gets underway. Be sure to account for the turbo in your overall height and width dimensions, as well as the front drive accessories being included in your overall engine length. For smaller engine compartments, such as what you’ll find in Jeep Wranglers, Toyota pickups, Broncos, and even Ford Rangers, the compact size of the 4BT makes good sense. In vehicles with larger engine bays, such as full-size trucks or larger SUVs, a 6BT swap can be pulled off without any major headaches.

 

Measure The Recipient Vehicle (Everywhere)

Classic Ford Pickup Truck High Boy F250 Diesel Conversion

Classic Ford Pickup Truck High Boy F250 Diesel Conversion

It’s crucial to first discover exactly how much space exists between the frame rails in your swap vehicle. A close second is to make sure the engine will clear the firewall, followed by whether or not you’ll be able to close the hood once it’s in place. Fabricating, performed either by you or a professional, may come into play here, with things like frame rail widening, relocating (or reworking) the firewall, and sourcing or building a cowl hood being common solutions to width, length, and height issues. Another trick for gaining clearance is adding a body lift to the vehicle.

 

 

Installing The Engine

Diesel Engine Swap Test Fit Ford F250 Repower Project

Diesel Engine Swap Test Fit Ford F250 Repower Project

Mounting the 4BT or 6BT requires solid homework be conducted as it pertains to motor mounts. A Cummins 4BT produces exceptional NVH (noise, vibration, and harshness). Especially at idle, you’re going to want a motor mount that can quell as much of that inherent NVH as possible. This is where hydraulic motor mounts get our vote. Though more expensive, they provide the best ability to isolate vibration and engine noise from the vehicle’s chassis. But that’s not the whole story, as where you mount the motor mounts plays an even more important role in curbing in-cab NVH.

 

Pay Special Attention To Motor Mount Location—It Makes All The Difference

JB 4x4 4BT Cummins Swap Jeep Willys Diesel Project

JB 4x4 4BT Cummins Swap Jeep Willys Diesel Project

Where you locate the motor mounts has more bearing on NVH than you may realize. In our experience of being associated with supplying 4BT engines to customers, the vehicle’s motor mounts should be fixed at approximately a 45-degree angle, as well as installed above the center line of the engine’s crankshaft. The motor mounts should be centered on the engine block for even weight distribution. It’s also important to pay attention to the location of the vacuum pump and power steering pump assembly. If you don’t, the motor mounts may not have enough clearance. Last but not least, make sure ample clearance exists near the starter.

 

Why The Cummins 4BT Has So Much NVH

Ford Ranger Cummins 4Bt Diesel Engine Swap

Ford Ranger Cummins 4Bt Diesel Engine Swap

Diesel engines with a secondary imbalance create noticeable harshness when in operation. There are no internal balancer shafts in the 4BT (a feature most modern small displacement engines have). On top of that, there is no harmonic balancer on the 4BT from the factory. When you combine that with the 4BT’s gear-driven design, a thin front timing cover and oil pan, and direct injection (with single-shot fuel injectors, no less), you get unavoidable NVH. Believe it or not, vibration in high-mile engines has even led to cracked timing gear covers. Pro Tip: high timing advance (usually for added horsepower) has a tendency to increase 4BT NVH. Keep injection timing reasonable and NVH will be slightly more manageable.

 

Hydraulic Motor Mounts—The Best In The Business

Hydraulic Motor Mounts 4BT Cummins Swap Parts

Hydraulic Motor Mounts 4BT Cummins Swap Parts

Although there is no 100-percent solution for the Cummins 4BT’s inherent NVH, its operation can be made significantly more pleasant by running a set of high-quality motor mounts. Combine that with locating the motor mounts in the aforementioned optimum location and you will be rewarded with the smoothest 4BT experience possible. As far as the “type” of motor mounts you need, once more our advice is to go with a set of hydraulic mounts. Not only do hydraulic motor mounts isolate the engine from the chassis, but they keep NVH from infiltrating the cab.

 

 

At The Firewall

Truck Firewall Ford High Boy F250 Cummins Diesel Conversion

Truck Firewall Ford High Boy F250 Cummins Diesel Conversion

Most common vehicle applications can accommodate the Cummins 4BT and its exterior dimensions (especially on length and width). However, 6BT conversions can require a bit of finesse, fabrication, and even creativity. Due to its 35-inch overall length, the 5.9L Cummins (6BT) isn’t a simple drop-in proposition for most older pickup trucks, and certainly not for Jeeps. The swap can be pulled off, but not without significant massaging of the vehicle’s firewall. In some cases, a new firewall will have to be built with a deliberate recession to accommodate the engine’s length. Then comes the upper rear section of the firewall (in the cowl area), where it behooves you to leave enough room to access the number 5 and 6 valve covers.

 

At The Grille

6BT Cummins 5.9L Diesel Engine Swap Vintage 4x4 Dodge Power Wagon

6BT Cummins 5.9L Diesel Engine Swap Vintage 4x4 Dodge Power Wagon

Length of the Cummins 6BT inevitably brings you to the front of the vehicle. After all, you can only move the lengthy inline-six so far rearward. And at the other end, you can only cut so much out of the core support. In 5.9L swaps where an intercooler is going to be run, sometimes you have to get creative. That can mean a lot of things, but some solutions at the grille include running a water-to-air intercooler as opposed to an air-to-air unit, building or spec’ing out a custom size radiator, and/or using compact, remote mount electric fans to keep the engine cool.

 

Oil Pan To Axle (Or Ground) Clearance

Cummins 4bt Diesel Engine Swap Oil Pan Ground Clearance

Cummins 4bt Diesel Engine Swap Oil Pan Ground Clearance

In some conversions, and namely those that entail shoehorning a B-series Cummins into a vehicle that was never designed or intended to house a deep-pan-equipped, industrial diesel engine, oil pan clearance is a real worry. Specifically, oil pan to axle clearance is a big concern—not only with the vehicle sitting stationary but when the suspension droops over bumps, jumps, or rougher roads. A custom, low-profile oil pan can help (but may limit or reduce engine oil volume) as can stiffer suspension, but a common, affordable solution for this problem is to add a body lift.

 

 

Axles

AAM 1150 Rear Axle Cummins Swap Diesel Conversion

AAM 1150 Rear Axle Cummins Swap Diesel Conversion

It’s no secret that the Cummins 4BT and 6BT turn out big low-rpm torque. In fact, it’s one of the biggest advantages of both engines. But big torque production means stronger axles are needed if you want the driveline to be reliable and durable. Luckily, there are loads of ¾-ton and larger pickup truck axles available to suit your needs. For those that intend to keep smaller axles under their Cummins swap project, it’s worthwhile to upgrade their weak links. Things like higher quality axle shafts, increased spline count axles, locking differentials, or even cryogenically treating them can go a long way in the durability department.

 

Endless Axle Options

Gm 14 Bolt Rear Axle Cummins Diesel Swap Drivetrain Parts

Gm 14 Bolt Rear Axle Cummins Diesel Swap Drivetrain Parts

Axle selection can (and will no doubt) vary from swap to swap, but there are certain front and rear units that’ve more than proven themselves with 4BT and 6BT torque bearing down on them. Popular, durable, solid front axle options include the Dana 44, Dana 60, and AAM 925—all of which have great aftermarket support for beefier internals and ways to make them even stronger. As for sound rear axle options, the Dana 70, Dana 80, 14-bolt, AAM 1150, and AAM 1180 are all extremely tough right out of the box. However, they too can be upgraded to handle added horsepower, torque, and abuse.

 

 

Picking The Right Suspension

Dana 60 Front Axle Cummins 6bt Diesel Engine Swap Ford Truck

Dana 60 Front Axle Cummins 6bt Diesel Engine Swap Ford Truck

At roughly 750 pounds for a Cummins 4BT and more than 1,000 pounds for a 6BT, B-series engines aren’t exactly lightweight. More specifically, they’re significantly heftier than the gasoline engines they usually replace. Common suspension concerns include premature wear and tear on front-end parts, as well as poor comfort and handling characteristics. As a general rule of thumb, the front suspension you spec out for a 4BT swap should at least match that of what can be found under a late-model half-ton pickup truck. As for the 6BT, stick with ¾-ton or larger pickup truck components.

 

Why A Donor ¾-Ton Truck Is Ideal

Second Gen Dodge Ram 5.9L Cummins Swap Donor 4x4 Truck

Second Gen Dodge Ram 5.9L Cummins Swap Donor 4x4 Truck

Luckily, sourcing a factory ¾-ton pickup truck front suspension is a budget-friendly undertaking in most instances. And like we always say, grabbing a fully equipped donor vehicle is ideal. Not only do you get to rob the OEM suspension off the donor truck, but the axles, transmission, transfer case, driveshafts, and even frame are also typically there for the taking. Reusing the leaf springs originally mounted above a rear Dana 80 will be a great starting point on any 6BT conversion project, as would the truck’s front Dana 60 (and coil or leaf spring) arrangement. These components were engineered to last long-term under the weight and twist of the 5.9L Cummins.

 

A Note On IFS Systems

Gm Aam 925 Ifs Chevy 2500 Hd Independent Front Suspension

Gm Aam 925 Ifs Chevy 2500 Hd Independent Front Suspension

For improved ride comfort (and in many cases, improved traction), independent front suspension (IFS) can’t be overlooked. Just make sure the IFS system you choose has a bit of overkill built into it. For example, the AAM 925 IFS front-end found under ’01-newer Chevrolet and GMC Silverado/Sierra 2500 and 3500s is a great candidate for placing under the weight of a Cummins 4BT. And while the AAM 925 IFS might survive just fine under the heft of a 6BT, there is no telling how long it would hold up for the long haul. If it’s our money and the swap project is four-wheel drive, we’d save the IFS for the 4BT and go straight axle with any 4x4 6BT swap.

 

 

Wiring

Electronic Wiring Harness Cummins Diesel Engine

Electronic Wiring Harness Cummins Diesel Engine

This is typically the most hated part of any engine swap. Running wires through the firewall, cutting, splicing, adding relays, and tracing wires isn’t fun for most of us. In fact, even if you know your way around a wiring harness, it can still eat up 20 to 40 hours of your time if you DIY the job. Even when you’re swapping a mechanically injected Cummins into a late-model, newer generation Ram, for example, you’ll still have to strip the OEM wiring harness and find out each of its key-ons. But not only that, you’ll have to comb through each of the pin-outs and figure out what you do and don’t need.

 

Engine Harness Options

6.7L Cummins Electronic Wiring Harness

6.7L Cummins Electronic Wiring Harness

Don’t have the time to trace wires, run wires, or pinpoint which wire goes where? Thanks to the diesel aftermarket, that’s no longer a worry, so long as you have the budget for it. Stand-alone wiring harnesses exist (or can be built) by many reputable companies and most can even make the finished product look like the OEM made it. Luckily, for engines with few electronics to speak of, such as the Cummins 4BT and 6BT, the task of wiring everything up is much more simplified—for either the DIY’er or the business tasked with sorting through and building a wiring harness.

 

 

Keeping Things Cool—With A Proper Radiator And Fans

Factory Ford 6.4L Powerstroke Diesel Radiator F350 Super Duty

Factory Ford 6.4L Powerstroke Diesel Radiator F350 Super Duty

Optimized cooling is paramount for any diesel swap—especially one that’ll be expected to tow or haul heavy. Proper cooling begins with sourcing a radiator of the correct size and type. Most of the time, the best way to ensure this is the case is by repurposing the factory radiator that was installed in front of the engine you chose (or one from a similarly sized diesel engine). Sticking with an OEM radiator often means you can retain the factory fan shroud, clutch fan, radiator hoses, and even the overflow reservoir. But be forewarned that when real estate is limited near the grille, you may have to buy or build a custom radiator, as well as source your own fan(s).

 

Types Of Engine Fans

Electric Engine Fans Cummins 5.9L Swap Diesel Cooling System

Electric Engine Fans Cummins 5.9L Swap Diesel Cooling System

The job of any engine fan is to efficiently move air across the radiator. This makes having the right fan all the more important. Engines used in high-rpm racing applications, or where low-speed off-roading is the order of the day, often need help in the airflow department. Electric fans often get the nod here, and they’re also a great solution in tighter engine compartments. However, for 4BT and 6BT conversions that will spend their time towing or being worked hard, it pays to stick with a mechanical clutch fan, as they have a proven track record of both meeting the engines’ cooling demands under load and being highly durable.

 

 

Save Room For An Intercooler

Intercooler Fabrication Front Core Support Cummins Conversion Ford Truck

Intercooler Fabrication Front Core Support Cummins Conversion Ford Truck

An intercooler (be it the common air-to-air or the more elaborate yet more efficient water-to-air unit) should always be run in a turbo diesel swap. Not only will the engine see cooler EGT on the back end, but also a denser intake charge entering the cylinder head. And not only is cooler air conducive to making horsepower, but aftermarket testing has shown that it’s considerably easier on pistons. On top of that, an efficient intercooler package can provide significant low-rpm torque gains. Trust us, running an intercooler is a win-win, and is totally worth the effort of integrating it into the vehicle.

 

Water-To-Air Intercoolers: More Complicated, But More Efficient

Water To Air Intercooler Diesel Engine Cooling Turbo Boost Egt

Water To Air Intercooler Diesel Engine Cooling Turbo Boost Egt

Water-to-air intercoolers are a bit more complex than their air-to-air counterparts, but when it comes to performing, they definitely deliver. And because they don’t depend on air movement to cool compressed air leaving the turbo’s compressor housing, they can be packaged virtually anywhere on the vehicle. By either using antifreeze or water, these liquid-to-air heat exchangers can drop intake temperatures more effectively than air-to-air units, all while taking up much less space in an engine bay. Remember, cooler, denser intake air equates to higher horsepower, which helps explain why water-to-air intercoolers are so common in diesel motorsports.

 

 

Don’t Forget The Transmission!

Chrysler 727 TorqueFlite Automatic Transmission Cummins Diesel Swap

Chrysler 727 TorqueFlite Automatic Transmission Cummins Diesel Swap

Linking the engine to the axles brings us to the transmission, and the unit you choose here is vital to the overall picture. How the vehicle drives, how long it lasts, how efficient it is, and so much more depends on this one component. Below, you’ll find a list of proven, high input torque rating (and, arguably, the best) automatic and manual transmission options for both 6BT and 4BT Cummins swaps.

  • 6BT Manual Options: 1) NV4500 (highly common and easy to source a flywheel and the perfect clutch from a Dodge Ram 2500/3500 application), 2) NV5600 (tough as nails, six-speed, can be easily integrated using Dodge Ram 2500/3500 parts)
  • 6BT Automatic Options: 1) 47RH/RE (highly common and easy to source a flexplate and torque converter intended for a Dodge Ram 2500/3500 application), 2) 48RE (plentiful, packageable in most vehicles)
  • 4BT Manual Options: 1) AX-15 (five-speed), 2) T19 (four-speed), 3) SM465 (four-speed), 4) ZF S5-47 (five-speed rated for 470 lb-ft of torque)
  • 4BT Automatic Options: 1) TH400 (three-speed, used in countless step van applications)

 

Transmission Tunnel And Beyond

6bt Cummins 5.9L Diesel Engine 727 Automatic Transmission

6bt Cummins 5.9L Diesel Engine 727 Automatic Transmission

Again, measure and measure once more. As with the engine, some highly crucial dimensions need to be known prior to deciding which transmission you choose. Not only do you need to obtain the bell housing clearance at the firewall, but you also have to check for clearance around the starter (and possibly even mount the starter somewhere else if need be). For 4x4 vehicles, it’s important to know how much real estate exists to accommodate a transfer case. Custom length (and material) driveshafts and aftermarket transfer cases are available, as are divorced mount configurations, but retaining the complete transmission and transfer case combination that came with your donor vehicle is almost always the easiest path you can take.

 

For Swaps With Ground Clearance Requirements

Ford Cummins Swap Firewall Transmission Tunnel Fabrication

Ford Cummins Swap Firewall Transmission Tunnel Fabrication

Diesel-rated transmissions are typically larger than the versions employed in gasoline-powered vehicles. More often than not, this means you’re going to need additional space to squeeze your transmission of choice into place. At a bare minimum, expect some amount of fabrication work to be required. For Cummins swaps that are intended to excel off-road (or that’ve been lowered), the transmission will likely need to be mounted high and as far off the ground as possible in order to maximize ground clearance. Ground clearance stipulations often mean more floorboard, cabin, and transmission tunnel work will need to be performed. As a general rule of thumb, leave at least ½-inch of clearance around the transmission case.

 

Adapter Plates (Source Or Build Your Own)

Billet Aluminum Adapter Plate Cummins Conversion Diesel Swap Parts

Billet Aluminum Adapter Plate Cummins Conversion Diesel Swap Parts

Engine-to-transmission adaptation is 100-percent vital in allowing you to bolt the transmission of your choice to your engine. This is why adapter plates make the world of Cummins swaps go ’round. And in the majority of 4BT and 6BT swap projects, a custom or aftermarket version has to be obtained. Just take note that if you need to build (or have someone else build) a custom adapter plate, make sure it’s produced from 6061-T6 billet aluminum (or stronger) and that you know which starter you plan to use. This will ensure the adapter plate is both durable and that it integrates seamlessly.

 

Flexplates & Torque Converters

Triple Disc Torque Converter Automatic Diesel Transmission

Triple Disc Torque Converter Automatic Diesel Transmission

For automatic transmission swaps, the importance and strength of the flexplate cannot be overstated. Especially if your horsepower goal stretches beyond the factory rating, it’s wise to consider an aftermarket (i.e. billet) unit. At the very least, a cryogenically treated OEM flexplate should be run. Just as important as flexplate selection is the torque converter you choose. When spec’ing out a torque converter, always match it to the engine’s turbocharger for optimized spool up, transient response, and overall drivability. In manual transmission applications, make sure a good clutch and fresh slave cylinder are sourced.

 

 

Comments are closed.

×

Need Help Researching an Engine Swap?

Get our FREE 10-Page Buyer's Guide

    Quick Quote: 720-920-9162
    I am looking for an